Expedition 4WD V8-5.4L VIN 5 (2006)
6. Starting from the rear of the vehicle, install the first 3 line brackets.
-
Tighten to 5 Nm (44 lb-in).
7. Tighten the middle auxiliary heater line fittings.
8. Inspect the auxiliary heater lines for correct installation. Loosen, reposition and tighten as needed.
9. Install the heat shield and the bolts.
-
Tighten to 15 Nm (11 lb-ft).
10. Install the heat shield and the bolts.
-
Tighten to 15 Nm (11 lb-ft).
11. Install the RH catalytic converter.
12. Install the muffler.
13. Partially lower the vehicle.
