Expedition 4WD V8-5.4L VIN 5 (2006)
15. Install the heat shield bolt.
-
To install, tighten to 15 Nm (11 lb-ft).
16. Install the line bracket.
-
Tighten to 5 Nm (44 lb-in).
17. Install the spare tire carrier splash shield.
18. Install the RH front fender splash shield.
19. Install the RH front wheel.
20. Lower the vehicle.
21. Install the RH quarter trim panel.
22. Install the spare tire.
23. Lubricate the refrigerant system with the correct amount of clean PAG oil.
24. Evacuate, leak test and charge the refrigerant system.
