Expedition 4WD V8-5.4L VIN 5 (2006)
CAUTION: New O-ring seals must be installed any time the lines are disconnected from the steering gear.
6. Remove the steering line clamp plate bolt.
^
To install, tighten to 28 Nm (18 ft. lbs.).
^
Discard the steering line O-ring seals.
7. Disconnect the line from frame rail retainers and remove the return line.
8. To install, reverse the removal procedure.
^
Install a new O-ring seals.
^
Fill the power steering system.
