ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Shift Interlock Actuator Column Shift|Page 5401 > < Brake Shift Interlock Actuator Column Shift
Page 2
background image

latches.
Please refer to the appropriate vehicle shop manual to determine location of the front air bag sensors.
The side air bag sensors are located at or near the base of the B-pillar.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped). 

Disconnect the battery ground cable. Wait at least one minute before proceeding with the procedure to allow the backup power supply to deplete
its energy.

2. Remove the supplemental restraint system (SRS) steering column clockspring.

3. Remove the 3 bolts and remove the clockspring mounting bracket from the steering column.

^

To install, tighten to 6 Nm (53 inch lbs.).

4. Remove the 3 screws and position the wiring harnesses aside.

5. Disconnect the interlock actuator electrical connector.

Brake Shift Interlock Actuator Column Shift|Page 5401 > < Brake Shift Interlock Actuator Column Shift