Expedition 4WD V8-5.4L VIN 5 (2006)
11. NOTE: Make sure that all gaps in the urethane adhesive are smoothed into one continuous bead.
Backfill the urethane application and clean the excess.
12. CAUTION: The urethane adhesive must cure for a minimum of one hour before testing for air or water leaks.
After the urethane has cured, check the windshield seal for air or water leaks through the urethane adhesive bead and add urethane adhesive as
necessary.
13. Install the headliner.
14. Install the sun visors.
1
Position the sun visors.
2
Install the 4 screws.
-
If equipped, connect the electrical connectors.
15. Install the interior rear view mirror.
16. If equipped, install the roof opening panel trim.
17. If equipped, install the overhead console.
18. Install the A-pillar trim panels.
-
Install the bolts and covers.
19. Install the cowl grille.
20. Clean the interior and exterior of the windshield glass with an alcohol-free cleaner.
