Expedition 4WD V8-5.4L VIN 5 (2006)
6. Open the liftgate. Install the rear window wiper striker and wiper pivot arm mounting assembly nuts.
-
Tighten to 6 Nm (53 lb-in).
7. Close the liftgate.
8. Install the rear window wiper pivot shaft nut and handle.
-
Tighten to 18 Nm (13 lb-ft).
9. Install the dust boot cover.
10. Install the rear wiper pivot arm.
11. Open the liftgate.
12. Remove the rear window wiper motor aligning tool.
13. Open the liftgate glass.
14. Install the liftgate trim panel.
15. Test the liftgate and liftgate glass for normal operation.
