Expedition 4WD V8-5.4L VIN 5 (2006)
8. Install the rear window wiper pivot shaft nut and handle. Tighten to 18 Nm (13 lb-ft).
9. Install the dust boot cover.
10. NOTE: This step makes sure that the wiper motor is in the PARK position.
Turn the rear window wiper switch ON and allow the motor to operate for at least one cycle. Turn the rear window wiper switch to OFF.
11. Install the rear wiper pivot arm onto the rear window wiper motor shaft.
1
Position the wiper pivot arm onto the rear window wiper motor shaft.
2
Tighten the nut to 15 Nm (11 lb-ft).
3
Install the cover.
12. Open the liftgate.
13. Install the liftgate trim panel.
14. Test the liftgate and liftgate glass for normal operation.
