Explorer 2WD V6-245 4.0L (1994)
16.
Verify Liftgate operation.
Inspection Procedures
In some isolated cases, the Liftgate may be damaged in the area around the bracket which connects the hydraulic lift cylinder to the liftgate. If damaged,
the following questions are to be answered:
If the answer to any of these questions is "yes", then the liftgate must be replaced. If the answer to all of these questions is "no", then install the bracket
reinforcement kit and release the vehicle.
NOTE:
If the liftgate is replaced, do not install the reinforcement kits.
NOTE:
After painting a replacement liftgate, the existing components (wiper motor, rear window, electrical harness, etc.) are to be transferred to the new
Liftgate.