Explorer 2WD V6-245 4.0L (1994)
Rear Main Seal Installation Tool
23.
Always use a new rear oil seal. Coat the rear main seal-to-cylinder block surface of the oil seal with oil X0-5W30-QSP (WSE-M2903-A1) or
equivalent SAE 5W-30 Service SG oil. Coat the seal contact surface of the oil seal and crankshaft with heavy SF engine oil. Install the new seal
using Rear Oil Seal Installer T95T-6701-A.
24.
Remove the engine from the stand and reinstall in the vehicle.
NOTE: It is recommended that the engine not be run or oil be added for 24 hours to allow sealers to cure properly.