Explorer 2WD V6-245 4.0L (1994)
Fuel Filler Pipe: Service and Repair
Fuel Tank And Filler Pipe
REMOVAL
1. Loosen the screw clamp attaching fuel filler hose to tank.
2. Loosen screw clamp attaching fuel fill vent hose to tank.
3. Remove the three screws attaching the fuel filler pipe assembly.
4. Remove ground strap screw from frame.
5. Detach fuel filler and vent systems from fuel tank and remove through frame rail/body side void.
INSTALLATION
1. Position the fuel filler/vent system and attach the hoses to the tank.
2. Position the filler neck to the body and install the three filler pipe screws. Tighten screws to 3.0-4.0 Nm (27-35 lb in).
3. Tighten the screw clamp attaching the fuel filler hose assembly to 3.0-4.0 Nm (27-35 lb in).