Explorer 2WD V6-245 4.0L (1994)
SPECIAL SERVICE TOOL(S) REQUIRED
Description ...................................................................................................................................................................................................... Tool Number
Safety Belt Bolt Bit (#80 Torx(R)) ................................................................................................................................................................... T77L-2100-A
1. Remove front seat shoulder strap guide cover and remove the bolt.
2. Lift floor carpet and remove bolt retaining floor anchor to front floor pan.
3. Remove quarter trim panel.
4. Remove the screw retaining the belt loop to the sheet metal (two-door models only).
5. Remove the bolt retaining the front safety belt retractor and tongue.
6. Remove front safety belt retractor and tongue from the vehicle.
Installation
1. Position front safety belt retractor and tongue to the vehicle and install the retaining bolt. Tighten to 30-40 N.m (22-30 ft-lb).
