Explorer 2WD V6-245 4.0L (1994)
Differential Case: Service and Repair
Standard Type
1. Remove pinion gears and thrust washers, rotating as necessary to align with windows.
2. Remove side gears and thrust washers.
3. Remove and discard ring gear attaching bolts, then press ring gear off of case. Models equipped with anti-lock brakes incorporate an exciter ring
located on the ring gear. Removal of this ring is not necessary when removing ring gear, but care should be taken when removing ring gear
assembly.
4. Using suitable puller, remove differential bearings from case.
5. Using suitable press, install differential bearings on case.
6. Install ring gear on case, coat bolts with suitable locking compound and tighten to 70-85 ft lb.
