ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Keyless Entry Key-Pad > < Hood Sensor/Switch (For Alarm)|Specifications

Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)

Page 1
background image

Antenna - Keyless Entry: Service and Repair

REMOVAL

1. Remove the LH quarter trim panel.

2. Disconnect the antenna from the remote anti-theft personality module and secure aside.

NOTE:  This vehicle uses an antenna that runs along the wiring harness. Do not remove the damaged antenna from the wiring harness.

INSTALLATION

1. Connect the new antenna to the remote anti-theft personality module and secure along the path of the wiring harness.
2. Install the LH quarter trim panel.

Keyless Entry Key-Pad > < Hood Sensor/Switch (For Alarm)|Specifications