Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Driver/Vehicle Information Display: Initial Inspection and Diagnostic Overview
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical and electrical damage.
Mechanical
-
Check message center indicator for obvious damage.
Electrical
-
Blown fuse:
-
I/P fuse panel fuse 10 (7.5 A).
-
I/P fuse panel fuse 9 (10 A).
-
Damaged wiring harness.
-
Loose or corroded connector(s).
-
Circuitry open/shorted.
-
Damaged vehicle speed sensor.
3. If inspection reveals obvious concerns that can be readily identified, repair as required.
4. Perform message center on-board diagnostic test as follows:
-
Press RANGE and SYSTEM CHECK simultaneously while turning the ignition switch to the RUN position.