Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
-
Inspect the disc brake caliper for leaks.
^ If leaks are found, disassembly is required.
INSTALLATION:
-
Install the front disc brake caliper.
1. Install the front disc brake caliper.
2. Install the front disc brake caliper slider pins.
-
Install the front brake hose.
^ Use new copper washers, connect the front brake hose.
-
Bleed the front disc brake caliper.
-
Clean the wheel hub mounting surface.
WARNING: ALWAYS REMOVE ANY CORROSION, DIRT OR FOREIGN MATERIAL PRESENT ON THE MOUNTING
SURFACES OF THE WHEEL OR THE SURFACE OF THE WHEEL HUB, BRAKE DRUM OR FRONT DISC BRAKE ROTOR
THAT CONTACTS THE WHEEL. INSTALLING WHEELS WITHOUT PROPER METAL TO METAL CONTACT AT THE WHEEL
MOUNTING SURFACES CAN CAUSE THE LUG NUTS TO LOOSEN AND COULD ALLOW THE WHEEL TO COME OFF
WHILE THE VEHICLE IS IN MOTION, CAUSING LOSS OF CONTROL.