Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Cruise Control Servo Cable: Adjustments
1. Remove the actuator cable clip.
2. Adjust the actuator cable.
1. Pull on the actuator cable to remove any slack.
2. Back off the actuator cable one notch.
NOTE
^
The actuator cable must not be pulled tight for proper operation.
^
The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.
3. Install the actuator cable clip.
1. Hold the speed control actuator cable.
2. Insert the actuator clip securely.