Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
7. Position the camshaft timing slots to properly fit Camshaft Holding Tool and position and secure the tool on cylinder head.
NOTE: Camshaft timing slots are off-center and below the center-line of the camshafts.
8. Position and secure the Camshaft Gear Positioning/Holding Tool on the cylinder head.
9. Tighten camshaft sprocket bolt.
1. Tighten bolts on Camshaft Positioning/Holding Tool.
2. Using the Camshaft Gear Torque Adapter tighten the camshaft sprocket bolt.
CAUTION: Right hand camshaft sprocket bolt is left hand threaded bolt.
10. Remove the Camshaft Chain Tensioner Tool.