Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
6.
Remove the LH camshaft chain tensioner. See Figure 2.
NOTE:
The camshaft must be held in place to loosen the sprocket bolt.
7.
Install Camshaft Gear Holding Tool T97T-6256-B and Adapter T97T-6256-A onto the camshaft sprocket. Loosen, but DO NOT remove, the
camshaft sprocket bolt. See
8.
Remove the special tools and sprocket bolt.
9.
Hold the crankshaft from turning with special tool 303-674 and loosen the jackshaft sprocket bolt. See Figure 2.
10.
Remove the primary chain tensioner. See Figure 3.
11.
Remove the primary chain, jackshaft sprocket and crankshaft sprocket. See Figure 3.
12.
Remove the camshaft drive cassette. See Figure 4.
^
Remove the upper and lower chain guide bolts.
