Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
12. Raise and support the vehicle.
13. Remove the RH wheel and tire.
14. Remove the RH lower splash splash.
15. Remove the RH camshaft tensioner and install the special tool.
16. Lower the vehicle.
17. Tighten the bolts.
a. Tighten the special tool top two clamp bolts to 10 Nm (89 inch lbs.).
b. Tighten the camshaft bolt.
CAUTION: The right-hand camshaft sprocket bolt is a left-hand threaded bolt.
18. Remove the special tool.