Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
28. Position the camshaft timing slots below the centerline of the camshaft to correctly fit the special tools, and install the special tools on the rear of
the LH cylinder head.
Note: The camshaft timing slots are off-center.
29. Remove the LH camshaft tensioner and install the special tool.
30. Tighten the bolts.
a. Tighten the special tool top two clamp bolts to 10 Nm (89 inch lbs.).
b. Tighten the camshaft bolt.
31. Remove the special tool.