Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
T97T-6256-B. See Figure 8.
13.
NOTE: The camshaft timing slots are off center.
Position the camshaft timing slots below the centerline of the camshaft to allow proper installation of Camshaft Holding Tool T97T-6256-C and
Adapter T97T-6256-D onto the cylinder head. Then, install both tools onto the cylinder head. See Figure 9.
14.
Raise and support the vehicle.
15.
Remove the RH wheel and tire.
16.
Remove the lower splash shield.
17.
Remove the RH camshaft tensioner and install Timing Chain Tensioner Tool T97T-6k254-A. See Figure 10.
18.
Remove vehicle supports and lower the vehicle.
19.
CAUTION: The RH camshaft sprocket bolt is a left-hand threaded bolt.
