Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Timing Chain Tensioner: Service and Repair
LH Hydraulic Chain Tensioner
NOTE: Ford does not provide timing marks or additional information for servicing of the timing chains/sprockets without the special tools listed in this
procedure.
Special Tools
Timing Drive Components-LH Hydraulic Chain Tensioner
Removal and Installation
1. Remove the upper intake manifold. See: Intake Manifold/Service and Repair
2. Remove the thermostat housing. See: Cooling System/Thermostat Housing/Service and Repair
3. Remove the LH camshaft tensioner.
-
If using a new washer, tighten to 44Nm (32lb-ft).
-
If using the old washer, tighten to 67Nm (49 lb-ft).
