Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
![background image](/ford/explorer_2wd/v6-245_4.0l_sohc_vin_e_efi/Page-777006.png)
6.
Disconnect the following vacuum hoses: See Figures 1 and 2.
^
Brake booster.
^
Intake manifold tuning valve (IMTV) servo, if equipped.
^
Right side upper intake vacuum supply (two hoses).
^
PCV valve.
7.
Remove the fasteners securing the EVR/VIS solenoid bracket. It is not necessary to disconnect the solenoids. Refer to Figure 2.
8.
Remove the upper intake manifold screws.