Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
1. To install, reverse the removal procedure.
NOTE:
-
Lubricate the new O-rings and install the correct amount of new PAG Compressor Oil F2AZ-19577-AC or Motorcraft YN-12b or
equivalent meeting Ford specification WSH-M1C231-B to the new suction accumulator/drier.
-
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
2. Evacuate, charge and leak test the refrigerant system. See: Service and Repair
3. Test system for proper operation.