Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
12.
Detach fuel pump wiring harness and fuel lines from fuel tank. Refer to Figure 18.
13.
Clean area around fuel pump to prevent foreign material from entering fuel tank.
14.
Place alignment mark across fuel pump and fuel tank. This will assure correct alignment of fuel pump during assembly.
15.
Disconnect fuel pressure transducer electrical connector. See Figure 18.
16.
Remove fuel pump lock-ring.
17.
Remove fuel pump.
18.
Remove and discard fuel pump seal.