Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Center Mounted Brake Lamp: Service and Repair
Rear Hi-Mount Lamp Assembly
Heavy Duty Riveter
SPECIAL SERVICE TOOLS RECOMMENDED
REMOVAL
1. Remove the rear hi-mount lamp ballast.
2. Remove the three rear hi-mount lamp nuts.
3. Drill out the seven rear hi-mount lamp moulding rivets.
4. Remove the rear hi-mount lamp moulding.
1. Remove the two nuts.
2. Disconnect the washer hose.
3. Remove the rear hi-mount lamp moulding.