Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Map Light Bulb: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Use a thin bladed tool to carefully pry the lens out.
3. Remove the miniature bulb.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
