Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Alignment: Service and Repair
Caster and Camber
1. Remove the alignment plate.
(1) Remove the upper suspension arm adjusting nuts.
(2) Remove the alignment plate.
2. Install the (A) cams and the (B) upper arm adjusting nuts.
3. To increase the caster on the LF, move the (A) front of the front suspension upper arm outboard and move the (B) rear of the front suspension
upper arm inboard. To increase the camber LF and RF, move the (C) front suspension upper arm outboard equally.
4. To decrease the caster on the LF, move the (A) front of the front suspension upper arm inboard and move the (B) rear of the front suspension
upper arm outboard. To decrease the camber LF and RF, move the (C) front suspension upper arm inboard equally.