Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Throttle Body: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect the Throttle Position (TP) sensor electrical connector.
2. Remove the air cleaner outlet tube.
1
Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
2
Disconnect the crankcase ventilation tubes.
3
Loosen the clamps and remove the air cleaner outlet tube.
3. Disconnect the accelerator cable and bracket.
4. Remove the throttle body.
1
Remove the nuts.
2
Remove the throttle body.
CAUTION: Throttle body bore and plate area have a special coating and cannot be cleaned.