Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Seat Belt Buckle: Service and Repair
Rear Seat Belt Buckle
Four Door
REMOVAL
1. Fold the rear seat down to load floor position.
2. Remove the rear safety belt buckle assembly.
1
Remove the two nuts.
2
Remove the rear safety belt buckle assembly.
INSTALLATION
To install, reverse the removal procedure. Check for proper operation.
Two-Door
REMOVAL
1. Remove the rear seats.
2. Remove the rear safety belt buckles.
1
Remove the nuts.
2
Remove the rear safety belt buckles.
INSTALLATION