Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Arm/Disarm Switch: Testing and Inspection
DOOR DISARM SWITCH
Special Service Tool(s)
Special Tool
Use 73 Digital Multimeter to measure the door disarm switch resistance with the key removed from the lock cylinder. The resistance should be
more than 25,000 ohms. If not, replace the door disarm switch.
Measure the door disarm switch resistance with the key fully rotated to the end of the travel in the unlock direction. The resistance should be less
than 200 ohms. If not, replace the door disarm switch.
