Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
12.
Slightly lower fuel tank again.
13.
Disconnect front EVAP hose from top of fuel tank.
14.
Remove fuel tank from vehicle.
15.
Clean area around fuel pump to prevent foreign material from entering fuel tank. Refer to Figure 4.
16.
Place alignment mark across fuel pump and fuel tank. This will correctly align the fuel pump during reassembly.
17.
Remove fuel pump lock-ring, then remove fuel pump. See Figure 4.
18.
Remove and discard fuel pump seal.