Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
8. Disconnect the tie rod ends.
(1) Remove and discard the cotter pins.
(2) Remove the castellated nuts.
(3) Disconnect the tie rod ends from the steering knuckles.
9. Remove the LH tie rod end. Count and record the number of turns required to remove the tie rod end.
10. Remove the front stabilizer bar.
11. Remove the nuts.
12. Remove the power steering fluid cooler.
(1) Separate the power steering fluid return line hose from the power steering fluid cooler.
^
Allow the system to drain.
(2) Disconnect the power steering return hose.
(3) Remove the power steering fluid cooler.
