Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
10. Install the steering gear fluid lines.
(1) Install the power steering return hose and then tighten tube nut.
(2) Install the power steering pressure hose and tighten the tube nut.
NOTE: Replace the Teflon seals on the power steering return line tube nut and on the power steering pressure line tube nut.
11. Install the power steering fluid cooler.
(1) Connect the power steering return line hose.
(2) Connect the power steering return hose.
(3) Position the power steering fluid cooler and install the nuts.
12. Install the front stabilizer bar.
13. Install the LH tie rod end on the front wheel spindle tie rod.
^
Rotate the tie rod end the number of turns recorded during removal.