Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
2. Connect the front suspension lower arm to the front wheel knuckle/spindle.
1. Position the lower ball joint into the front wheel knuckle/spindle.
2. Install the new castellated nut.
3. Install a new cotter pin.
CAUTION: Install the cotter pin into the lower ball joint from outboard to inboard with the fingers bent together at a right angle. Failure to do so
will cause damage to the wheel and tire assembly.
3. Install the front shock absorber-to-front suspension lower arm nuts.
4. Install the stabilizer link bushing, washer, and nut.
5. Install the torsion bar.
NOTE: Whenever the torsion bar or torsion bar adjuster is removed, the vehicle ride height must be checked.
6. Install the tire and wheel assembly.
7. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
