Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
^
Replace both the left and right front sway bar link(s).
^
Torque front sway bar link hex nuts to 22-28 Nm (16-21.5 Lb/Ft).
NOTE:
DO NOT over torque front sway bar link fasteners.
^
If necessary refer to workshop manual "Suspension" section under stabilizer bar removal and installation for instructions and illustrations.