Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
8. Install the coast clutch piston spring retainer ring.
(1) Use Clutch Spring Compressor to compress the coast clutch piston springs.
(2) Install the coast clutch piston retaining ring.
CAUTION: Do not fully compress the Clutch Spring Compressor or damage to the coast clutch piston spring retainer may occur.
9. When installing friction plates, the word "TOP" should face up. If reusing plates, grooves must be installed clockwise. Install the coast clutch disc
pack.
CAUTION:
-
Coast clutch friction plates are directional and must be installed with grooves clockwise (I.D. to O.D.). The word "TOP" should face up.
-
If new clutch plates are being used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
10. Install the two steel clutch plates and two friction clutch plates in alternating order starting with a steel clutch plate.
11. Install the coast clutch pressure plate.
(1) Install the clutch pressure plate.
(2) Install the original coast clutch retaining ring.