Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
6. Install the direct clutch piston.
(1) Position the direct clutch piston in the intermediate brake and direct clutch drum.
(2) Push down evenly around the piston circumference.
CAUTION: Care must be taken to prevent damage to the seals during installation.
7. When installing friction plates, the word (TOP) should face up. If reusing plates, grooves must be installed clockwise. Install the direct clutch disc
pack.
CAUTION:
-
The direct clutch friction plates are directional and must be installed with grooves pointing clockwise (I.D. to O.D.) and the word (TOP)
facing up.
-
If new plates are used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
8. Install the five steel clutch plates and five friction clutch plates in alternating order starting with a steel clutch plate.