Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
4. Install the transmission fluid pan.
(1) Position a new transmission fluid pan gasket on the transmission fluid pan.
(2) Install and align the transmission fluid pan.
-
Loosely install the 18 transmission fluid pan bolts.
5. Tighten the transmission fluid pan bolts.
-
Use a crisscross sequence to tighten the transmission fluid pan bolts.
6. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
7. Fill transmission to proper fluid level.
-
Use MERCON V meeting Ford specification XT-5-QM.
NOTE: When filling a dry transmission and converter start with a minimum of 3.7 liters (4 quarts).