Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
6. Connect the transmission shift cable to the manual control lever.
7. Push in the transmission shift cable adjustment lock tab on the shift cable body.
8. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
9. Remove the 3.6 kg (8 lb) weight.
10. Verify that the vehicle will start in P or N and that backup lamps illuminate in R. If not, repeat steps 1 through 7 and perform a digital transmission
range sensor adjustment.
CAUTION: Do not adjust the transmission shift cable in any position other than overdrive.