Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
1. Install the fluid pump support into torque converter. Engage the splines of the one-way clutch inner race with the mating splines of the stator
support.
2. Rotate the torque converter both clockwise and counterclockwise. The fluid pump support should rotate freely without any signs of interference or
scraping within the torque converter.
If there is an indication of scraping, the trailing edges of the stator blades may be interfering with the leading edges of the impeller blades. In such
cases, replace the torque converter.
Torque Converter End Play Check
1. Install End-Play Checking Tool into the torque converter.
(1) Insert End-Play Checking Tool into the torque converter until it bottoms.
(2) Tighten the inner post until the tool is securely locked.
