Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Drive/Propeller Shaft: Description and Operation
NOTE:
-
Whenever the vehicle is raised on a hoist, inspect the universal joint slip yoke boot for rips or holes. Replace if required.
-
All driveshafts are balanced. If undercoating the vehicle, protect the driveshaft and universal joints to prevent application of any undercoating
material.
The driveshaft is a tubular shaft which transfers torque from the engine through the transmission to the axle. Driveshafts differ in length, diameter, and
type of slip yoke to accommodate various wheelbase and powertrain combinations
The driveshaft is connected to the driveshaft rear axle companion flange by a driveshaft flange yoke with four bolts. It is connected to the transmission
with a driveshaft slip yoke.