Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Windshield Washer Reservoir: Service and Repair
Rear
REMOVAL
1. Remove the LH quarter trim panel.
2. Disconnect the windshield washer reservoir filler hose from the top of the reservoir.
NOTE: To prevent spilling windshield washer fluid on the floor of the vehicle, drain the reservoir prior to removal.
3. Disconnect the windshield washer pump electrical connector.
4. Remove the screws and remove the windshield washer reservoir.
5. If necessary, disconnect the rear washer hose.