Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Front Door Exterior Handle: Service and Repair
Heavy Duty Riveter
SPECIAL SERVICE TOOLS
REMOVAL
NOTE: Front door shown, rear door similar.
1. Remove the door trim panel.
2. Remove the watershield.
3. Remove the outside door handle.
1
Disconnect the front door latch to door handle rod.
2
Drill out the two rivets and remove the outside door handle.
NOTE: The front door window glass must be completely up.
INSTALLATION
1. To install, reverse the removal procedure.
-
Use Heavy-Duty Riveter to install the rivets.
NOTE: Front door shown, rear door similar.