Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
1. NOTE: Use a suitable suction device to remove brake fluid from the master cylinder.
NOTE: Clean the anchor plate and stainless slipper surfaces.
NOTE: The inboard pad has a wear indicator tab.
Install the stainless slippers and the pads.
1
Install the stainless slippers.
2
Install the pads.
2. Inspect the anti-rattle spring, install a new spring if worn or damaged.
3. NOTE: If installing new pads, the caliper pistons must be compressed using a C-clamp and a wooden block. Lower the brake fluid level in the
master cylinder if required.
Rotate the disc brake caliper downward.