Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
1. Note: Lubricate the parts with Super Premium SAE 5W-30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G
before installing.
Install the camshaft.
2. Note: The camshaft bearing caps must be installed in the original position.
Note: After installing the bolts, check the camshaft for free rotation.
Position the oil supply tube, the camshaft bearing caps, and the bolts.
-
Tighten in the sequence shown in two stages.
-
Stage 1: Tighten to 6 Nm (53 inch lbs.).
-
Stage 2: Tighten to 16 Nm (12 ft. lbs.).
3. The camshaft must be re-timed.
4. Install the camshaft roller followers.