Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
1. NOTE: Be sure the crankshaft rear sealing surface is clean and free of any rust or corrosion. To clean the crankshaft rear seal surface area, use
extra-fine emery cloth or extra-fine 0000 steel wool with metal surface prep.
Lubricate the crankshaft rear seal with clean engine oil and install it on the special tool.
2. Install the special tools.
3. Position the crankshaft rear seal and the special tool.
4. Using the special tool, install the crankshaft rear seal.
5. Install the crankshaft spacer.
6. Install the spacer plate.
7. Install the flexplate or flywheel.