Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Intake Air Duct: Service and Repair
REMOVAL
1. Remove the engine appearance cover.
^
Disconnect the speed control cable (if equipped).
^
Remove the bolts.
2. Remove the air cleaner outlet tube.
1
Unclip the wire harness
2
Disconnect the crankcase ventilation tubes.
3
Loosen the air cleaner outlet tube clamps and remove the air cleaner outlet tube.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Make sure the screw clamps do not interfere with the throttle body cam.