Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
3. Install the side air bag module onto the front seat back frame mounting bracket, making sure the side air bag wiring harness is located behind the
seat backrest frame and side air bag module mounting bracket.
1
Position the side air bag module onto the front seat back mounting bracket.
2
Install the side air bag module retaining nut.
3
Install the side air bag module retaining nut.
4
Install the side air bag module retaining nut.
CAUTION:
^
The retaining nuts of the side air bag module must be tightened in the sequence described.
^
Make sure the side air bag wiring harness is not pinched between the side air bag module and the mounting bracket.
4. Tie-strap the side air bag module wire harness to the seat back frame.
5. Unroll the seat back trim cover, to position the deployment chute around the side air bag module.