Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Cruise Control Switch: Service and Repair
Without Remote Audio
REMOVAL
1. Remove the driver side air bag module. Refer to Air Bag Systems.
2. Remove the speed control actuator switches.
1
Remove the screws.
2
Disconnect the electrical connector then remove the speed control actuator switches.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16km (10 miles) or more to relearn the strategy.
